ONLINE FAQ

• CHAIN

  作者： |

  CHAIN（鏈條）THE CHAIN IS TOO TIGHT OR LOOSE?There is a zipper screw on the rear axle, see below picture. Please removethe black cover first, and then adjust the screw.Tighten the chain by screwing it clockwise;Loosen the chain by screwing ...

  MORE+

• BRAKES

  作者： |

  BRAKES1.    HOW TO ADJUST THE BRAKE?Step one: Please loosen the screw in below picture,then adjust the brake. Step two: After adjustment, the brake pads on bothside should be evenly paralleled to the rim. 2.    HOW TO...

  MORE+

• KICKSTAND

  作者： |

  KICKSTAND1.    NEW TYPE KICKSTAND- Installation method same as thetraining wheels, see below picture. 2.    OLD TYPE KICKSTAND, see below instruction:

  MORE+

• REFLECTORS & BASKET & BELL

  作者： |

  REFLECTORS & BASKET & BELL（輪回光、車籃、車鈴）1.   ATTACHING THE REFLECTORS:Please attach the white square reflector on the middle ofhandlebar, and the red oval reflector on the bracket of right rear fork. Seebelow picture: ...

  MORE+

• SADDLE

  作者： |

  SADDLE（鞍座）1.   HOW TO ASSEMBLE THE QUICK RELEASE?Please following below steps:1. Align the parts you have as below picture. 2. Tighten the adjustment nut. 3. Close the quick release lever. 2.   THE SEAT CAN’T BE ...

  MORE+

• HANDLEBAR & STEM

  作者： |

  TOPSIX: HANDLEBAR & STEM（把橫把立）1.   HOW TO PUT THE STEM INTO MIDDLE TUBE?Step one: Take awaythe protective cover at the end of stem. Step two: Align the stem& the lead pad as below: Step three: insertthe stem into head...

  MORE+